Home » Products » PC Round Solar Road Studs for Garden B1
PC Round Solar Road Studs for Garden B1

Body material: PC(Japan Brand)
Warranty: 12 Months
Power supply:  USA Brand Flexible High Efficient Solar Panel 5V/0.4W
Visual distance: > 800m
Load Bearing: 20 Tons
Working Mode: Flashing or Constant
Waterproof: IP68
Shank: Without shank

Share us:

PC Round Solar Road Stud Features

  • High brightness America brand led with 100000 hours of working time.
  • USA brand solar panel. 22% high conversion rate. Fast charge rate.
  • Japan brand Anti-UV PC case.
  • The LED lights of pc solar road stud come on automatically as soon as it starts getting dark every night.
  • Cost-effective, Solar Road Stud are easy to install and require absolutely no wires or maintenance.
  • Most quality Epoxy resin glue to fix the solar cat eyes road stud, making sure of solar power charge.
  • Accept OEM/ODM

 

PC Round Solar Road Stud Light for Garden color

Five colors for choice: White, Amber, Red, Blue, Green

 

PC Round Solar Road Stud Parameters

 

    Material:     PC(Japan Brand)
    Power supply:     USA Brand Flexible High Efficient Solar Panel 5V/0.4W
    Battery:     NI-MH 1.2V/600MAH or Lithium battery 3.2V/500MA
    Working model:     Blinking or Constant
Charging in daytime and working automatically at night
    LED colors:     Yellow, White, Red, Green, Blue
    Life span:    >3 Years
    Load Bearing:     20T
    Size:     φ117*23mm (φ4.61″*0.91″)
    Visual distance:     >800M
    Water poof:     IP68
    Carton Size:     2pcs/box; 60pcs/ctn; weight: 19kgs; carton size: 67.5*28*20cm
2pcs/box; 60pcs/ctn; weight: 41.49bs; carton size: 26.57″*11.02″*7.87″

 

PC Round Solar Road Stud
PC Round Solar Road Stud

Application of PC Solar Road Stud B1:

♥Schools and hospitals

♥Gardens

♥Deck and Dock

♥Walking paths

♥Bridge

♥Parks and campuses

♥Roundabout

 

How to install PC Round Solar Road Stud for Garden B1:

  1. Determine the installation location and distance, clean the surface of the Solar Road Stud, and ensure that the Solar Road Stud are installed on a flat road surface.
  2. Clean the bottom of the solar road stud and apply the epoxy glue evenly to the back of the stud.
  3. Press the side with glue on the road, secure the position, wait for the glue to dry out.
  4. Check within 2 hours of installation to ensure that all Solar Road Stud are properly installed and do not bend or deform due to compression.
  5. Please evacuate the installation isolation facility 6-8 hours after installing the solar road stud.
Inquiry
We not only provide a good product, but also provide high quality service. If you are interested in our products, you can contact us in the following ways.
Name:
*Email:
Phone:
Company:
* Messages:
Contact Information
Please feel free to give your inquiry in the form
We will reply you in 24 hours