Home » Products » Raised Aluminum LED Solar Road Stud For Sale D1
Raised Aluminum LED Solar Road Stud For Sale D1

Load Bearing: 20 Tons
Warranty: 12 Months
Body material: Heavy duty casting aluminum
Power supply:  Solar panel(monocrystalline 2.5V/0.2W)
Visual distance: > 800m
Working Mode: Flashing or Constant
Waterproof: IP68

Share us:

Aluminum Solar Road Stud Features:

•Up to 800 meters of visibility.

•Reliable all night, all-year-round performance.

•Totally sustainable harnessing free solar energy.

•Used where street lighting is either unavailable, Solar Road Stud not cost-effective, or environmentally impossible.

•Cost-effective, LED Solar Road Stud are easy to install and require absolutely no wires or maintenance.

•LED Solar Road Stud self-contained surface mounted.

•Solar Road Stud for road accept OEM/ODM

 

Raised Aluminum LED Solar Road Stud Light color
Five Solar Road Stud colors for choice: White, Amber, Red, Blue, Green

 

LED Solar Road Stud Parameters:

 

    Material:     Heavy duty casting aluminium
    Power supply:     Solar panel(monocrystalline 2.5V/0.2W)
    Battery:     NI-MH 1.2V/800MAH or lithium battery
    Working model:     Blinking or Constant
Charging at daytime and working automatically at night
    LED:    Diameter 5mm;2pcs or 3pcs per side
    LED colors:     Yellow, White, Red, Green, Blue
    Life span:    3 years
    Resistance:     >20T(static)
    Size:     L104*W104*H20mm  (L4.09″*W4.09″*H0.78″)
    Visual distance:     >800M
    Water poof:     IP68
    Carton Size:     60pcs/ctn(2pcs/box);21kgs; Carton size:58.5*24.5*18.5cm
[60pcs/ctn(2pcs/box);46.30bs; Carton size:23.03″*9.65″*7.28″]

 

Raised Aluminum LED Solar Road Stud For Sale
Raised Aluminum LED Solar Road Stud For Sale

 

Application of Solar Road Stud D1:

♥Schools and hospitals

♥Gardens

♥Deck and Dock

♥Walking paths

♥Bridge

♥Parks and campuses

♥Roundabout

 

Installation Method Of  Solar Road Stud D1:

  1. Determine the installation location and distance, clean the road surface, and ensure that the Solar Road Stud lights are installed on a flat road surface.
    Clean the bottom of the solar studs and apply the epoxy glue evenly to the back of the studs.
    3. Press the side with the glue on the road, fix the position, wait for the glue to dry.
    4. Check within 2 hours of installation to ensure that all Solar Road Studs are not installed incorrectly and are not bent or deformed due to compression.
    5. Remove the installation isolation facility within 6-8 hours after the installation of the Solar Road Studs.
Inquiry
We not only provide a good product, but also provide high quality service. If you are interested in our products, you can contact us in the following ways.
Name:
*Email:
Phone:
Company:
* Messages:
Contact Information
Please feel free to give your inquiry in the form
We will reply you in 24 hours